Post-Construction Termite Treatment in Tirupati
Already seeing termite damage in your home or office? Apollo Pest Control specializes in post-construction termite treatment for existing buildings in Tirupati using the proven drilling and injection method. We eliminate active termite colonies and create a chemical barrier to prevent future infestations, backed by a 5-year service warranty.
What is Post-Construction Termite Treatment?
Post-construction termite treatment is the process of treating an already-built structure to eliminate existing termite infestations and prevent future attacks. This is necessary when pre-construction treatment was not carried out during building, or when the original treatment has worn off and termites have found their way into the structure. It is the most common type of termite treatment for homes, apartments, offices, and commercial buildings that are already occupied.
The treatment involves drilling small holes (approximately 12mm diameter) at regular intervals along the junction of the floor and wall, both on the interior and exterior of the building. These holes are drilled through the flooring material (tiles, marble, granite, mosaic, or concrete) into the soil beneath. A liquid termiticide solution is then injected under pressure into each hole, saturating the sub-soil to create a continuous chemical barrier. After injection, the holes are sealed with cement or white cement to match the surrounding floor, leaving virtually no visible trace of the treatment.
In addition to the drilling and injection method, we also apply chemical treatment to active termite mud tubes, termite-damaged woodwork, and any visible termite entry points on walls. For wooden door frames and window frames showing termite damage, we inject termiticide directly into the wood using specialized equipment. This comprehensive approach ensures that both the soil barrier and the above-ground termite activity are addressed simultaneously, providing complete protection for the entire structure.
Benefits of Post-Construction Treatment
- No Structural Damage: The 12mm drill holes are small, precisely placed, and sealed after treatment with matching cement. There is no damage to walls, pillars, or load-bearing elements of your building.
- 5-Year Warranty: Every post-construction treatment comes with a comprehensive 5-year service warranty, including free re-treatment if termite activity is detected during the warranty period.
- Treats Active Infestations: Unlike preventive treatments, post-construction treatment directly targets and eliminates existing termite colonies that are actively damaging your property.
- Suitable for All Building Types: Our treatment works on all types of existing structures including independent houses, apartments, multi-storey buildings, offices, shops, temples, hospitals, and industrial facilities.
- Minimal Disruption: The treatment can be carried out while the building is occupied. Most treatments are completed within a single day, and occupants can return to treated rooms within 2-4 hours.
- Long-Lasting Protection: The chemical barrier created in the soil remains effective for 3 to 5 years, preventing termites from re-entering the structure through the ground.
Frequently Asked Questions
Yes, absolutely. Post-construction termite treatment is specifically designed for buildings that are already built and occupied. The drilling and injection method allows us to create a chemical barrier in the soil beneath the existing floor without demolishing or significantly altering the structure. This method has been used successfully for decades and is recommended by the Bureau of Indian Standards (IS 6313 Part III). Whether your building is 5 years old or 50 years old, post-construction treatment can effectively eliminate termites and protect the structure going forward.
The drill holes are very small, approximately 12mm (about half an inch) in diameter, and are placed along the wall-floor junction where they are least visible. After the chemical is injected, each hole is carefully sealed with white cement or coloured cement that matches your floor as closely as possible. For vitrified tiles and marble floors, the sealing is done with matching grout. In most cases, the sealed holes are barely noticeable after treatment. Our technicians take great care to minimize aesthetic impact, and we always discuss the drilling plan with the property owner before starting work.
For a standard 2-3 BHK apartment or independent house, the treatment typically takes 4 to 6 hours to complete, including drilling, injection, and sealing. Larger properties such as bungalows, villas, or commercial buildings may take a full day. The treatment is carried out in a single visit in most cases. We recommend vacating the treated rooms for 2-4 hours after treatment to allow the chemical to settle, but the rest of the building can be used normally during and after the process. There is no need to move furniture in most cases, as drilling is done only along the perimeter walls.
The cost of post-construction termite treatment depends on the total area to be treated (measured in square feet or running feet of wall perimeter), the type of flooring (harder materials like granite require more effort to drill), the severity of the infestation, and the type of chemical used. We provide a free on-site inspection and a detailed, transparent quotation with no hidden charges. The quote includes the cost of treatment, sealing of drill holes, and the 5-year warranty. Contact us to schedule a free inspection and receive a customized estimate for your property.